How To Powerslide On A Scooter (Step By Step)

Powersliding on a scooter is a great way to show off your skills and get some extra speed. It may look difficult, but anyone can do it with a bit of practice and the right technique!

If you’re a beginner looking for how to powerslide on a scooter, this guide is for you. We’ll cover everything from how to set up your scooter to the proper technique for powersliding. By the end of this guide, you’ll be power sliding like a pro!

How To Powerslide On A Scooter

How To Powerslide On A Scooter

Powersliding on a scooter is all about using your weight to transfer the scooter’s wheels from one side to the other. This is usually done by leaning hard to one side and then quickly shifting your weight to the other. Also, it’s used to turn quickly and sharply.

Two main types of powerslides are the manual powerslide and the footbrake powerslide.

The manual powerslide is the most common and is done by simply leaning your weight to one side of the scooter and then quickly shifting it back to the other. This will make the rear wheel slide out from under you, and you’ll be power sliding!

The footbrake powerslide is done by engaging the rear brake while you’re already leaning to one side. This will cause the rear wheel to lock up and slide out from under you. However, this may ruin your scooter’s braking system, so it’s not recommended to use it everytime.

Setting Up Your Scooter

Before you start learning powersliding on your scooter, your scooter must be properly set up. This means having the right tires, wheels, and deck size.

Not all kick scooters are designed for powersliding or tricks, so it’s important to choose one that is. The best scooters for powersliding are those with a lower deck, smaller wheels, and softer tires.

This is because a lower deck will make it easier to lean to one side without tipping over. Smaller wheels are better for sliding because they’re easier to drift. Softer tires will grip the ground better and help you stay in control while sliding.

If you’re a 10 or 12 year old, then you’re in luck because we’ve already put together a list of the best stunt scooter for 10 year old and the best stunt scooters for 12 year olds.

Powersliding Surface

The surface you powerslide on is also important. The best surfaces for sliding are smooth and dry with good grip. We found concrete as the best surface to powerslide on. If you’ve no other option, then asphalt will do, but it’s not as good. Else join skatepark which has special powerslide area.

You don’t want to powerslide on dirt, grass, or sand because you won’t have enough grip, and you’ll likely crash. Also, it will ruin your scooter’s wheels.

Proper Powersliding Technique

Now that you know how to set up your scooter and what surface to powerslide on, it’s time to learn the proper technique.

Step 1: Start by riding slowly and then build up speed. You don’t want to go too fast at first, or you may lose control and crash.

Step2: Put your back foot on the tail of the scooter and your front foot in the middle of the deck. This will give you more control when powersliding. When you’re ready to slide, get your half back foot off the tail and position it near the front bolt.

Step 3: When you’re ready, lean hard to one side of the scooter. You want to transfer as much weight to that side as possible.

Step 4: As you’re leaning, quickly shift your weight to the other side of the scooter. This will cause the rear wheel to slide out from under you, and you’ll be powersliding.

Step 5: To stop sliding, lean back to the scooter’s center. This will transfer your weight back to the rear wheel and stop the slide.

Step 6: Practice, practice, practice! The more you powerslide, the better you’ll get at it. Just be sure to start slowly at first, then build up speed as you get more comfortable.

Tips For Powersliding

Here are a few final tips to help you master the powerslide:

Wear Safety Gears: The most important thing is to wear proper safety gear when learning how to powerslide. This includes a helmet, elbow, and knee pads.

This will protect you from injuries and give you the confidence to try new things.

Don’t Go Too Fast: It’s important to build up speed gradually. Don’t go too fast at first, or you may lose control and crash. Start slow, then gradually increase your speed as you get more comfortable.

Keep Your Weight Forward: When powersliding, be sure to keep your weight forward. This will help you maintain control and balance. Also, the rear wheel will likely slide out from under you if your weight is forward.

Look Ahead: When sliding, it’s important to look ahead at where you want to go. This will help you stay on course and avoid obstacles.

Don’t Ride in Traffic: It’s important to find a safe place to powerslide. You don’t want to be riding in traffic or around people where you could crash into them.

Don’t Lean Too Much: You want to lean hard to one side when sliding but don’t lean too much, or you’ll lose control. Find the balance between leaning too little and too much. You can find this by practice only.

Avoid Puddles: Water can make your wheels slip, so it’s important to avoid puddles when powersliding. Also, this can make your scooter dirty and wheels packed with mud which is not good for your stunt scooter.

Be Confident: The most important thing is to be confident when learning to powerslide. If you don’t believe in yourself, you’ll never be able to do it. So get out there and practice until you’ve got it down.

Don’t Ride in the Rain: Rain can make the surface slippery and dangerous to ride on. So it’s best to avoid powersliding in the rain.

If you want to learn other tricks you can check our guide on how to do tricks on a scooter.

Conclusion

This is all you need to know about how to powerslide on a scooter. Just remember to start slow, build up speed gradually, and practice until you’ve got it down. Also, be sure to wear proper safety gear and find a safe place to ride.

Now go out there and have some fun!

Leave a Comment