How To Replace Razor Scooter Handle Grips? (Guide)

Is your Razor scooter handle grip starting to wear down? If you’re looking for an easy and cost-effective way to replace your handle grips, this blog post is for you.

With time, you may find that the handle grips of your scooter start to become worn and slippery. This can make it difficult to control the scooter and make riding less enjoyable. Replacing the handle grips is a great way to restore your scooter’s grip and control.

Hence, in this blog post, we’ll guide you on how to replace Razor scooter handle grips. We’ll discuss what materials you’ll need and provide a step-by-step guide on how to do it. So let’s get started.

How To Replace Razor Scooter Handle Grips

How To Replace Razor Scooter Handle Grips

Replacing the Razor scooter handle grip or any other kick scooter’s handle grip doesn’t require any special skills or tools. You only need a few basic materials and patience to complete the job.

The materials you’ll need to replace the handle grips are:

  • New Razor scooter handle grip (2)
  • Soapy Water
  • Cloth to clean
  • Blade, if needed
  • Your Razor scooter

Now that you have the required materials let us discuss how to replace your handle grip.

Step 1: Remove the Old Handle Grip

The first thing to do is to remove the old handle grip from your Razor scooter. To do this, first try to pull it off with your hand.

If it stuck, spray some soap water between the handle and the grip, then work it out with your hand. Slowly, keep pulling it until the grip completely comes off.

Lastly, if this doesn’t work, you can use a blade to cut through the grip. Be very careful when using the blade, as you don’t want to scratch your scooter accidentally. This is the last option, so try the first two methods before reaching for a blade.

Step 2: Clean the Handle

Once you’ve removed the old handle grip, you’ll need to clean the handle. To do this, use a damp cloth to wipe off any accumulated dust or dirt on the handlebar.

Once the handle is clean, let it dry for a few minutes before proceeding to the next step.

Step 3: Install the New Handle Grip

Now that you’ve cleaned the handle, installing the new grip is time.

Before you jump on this, make sure to choose the best handle grip for your scooter. Many options are available in the market, so check out customer reviews to ensure you get the best one.

Nowadays, some grips come with screw fitting, so you don’t have to force it while fitting. On the other hand, if you find it costly, you can simply go with any premium quality same type of grip also.

Now, if you’ve got the screw-type grip, simply screw it to the handlebar. This process doesn’t require force and should be done quite easily.

However, if you’ve opted for the other type of grip, you’ll need to put some force into installing it. For this, start from one end and slowly press the grip against the handlebar until you’ve covered the entire length of the bar. You can spray soapy water on the handlebar and the grip to get this done easily.

Once you’ve securely installed the handle grip, make sure to check for any air bubbles or gaps where it’s not properly installed. If there’s any, simply press it down again with your hand until all the bubbles and gaps are gone.

Step 4: Clean and Enjoy

Once you’ve done all the above steps, your handlebar grip is ready to use. To finish off, use a damp cloth to wipe down the handlebar again, and you’re all done.

Now all that’s left is to enjoy your scooter with its new handle grip.

If you like performing stunts on scooters, you can check our recommendation on the best stunt scooter article.

Why It Is Important To Replace A Razor Scooter Handle Grip

As of now, you’ve seen how to replace scooter grips. But you may be wondering why it is important to do this in the first place.

Well, there are many reasons. Here are some of the most important ones:

It provides better grip and control – Your hands won’t slip even when you’re riding on wet surfaces or if your hands are sweaty.

It improves the look and feel of your scooter – A new handlebar grip can make a big difference in how your scooter looks and feels.

It increases the life of your scooter – A worn-out handlebar grip can cause damage to the metal handlebar, eventually affecting your scooter’s life.

It provides better shock absorption – A new handle grip can help absorb shocks, reducing the impact of bumps and vibrations on your hands.

If you find any other issue with your scooter, you can check our guide on how to fix a kick scooter.

FAQs

Q. How do you put new handlebar grips on a scooter?

A. To install a new handlebar grip on a scooter, remove the old one and clean the handlebar. Once it’s clean and dry, you can either screw on the new grip (if it has a screw fitting) or put pressure on it until it covers the entire handlebar length.

Q. How do you remove handlebar grips from a scooter?

A. To remove handlebar grips from a scooter, try to pull it off with your hand first. If it’s stuck, spray some soapy water between the handle and the grip, then work it out with your hand. Lastly, if this doesn’t work, you can use a blade to cut through the grip.

Q. How do you put scooter grips on a scooter?

A. To put scooter grips on a scooter, first make sure to choose the best handle grip for your scooter. Second, apply force onto the grip until it covers the entire length of the handlebar.

Conclusion

Replacing a scooter handle grip is an easy and important task for every scooter owner. With the help of this guide, you can easily do it yourself and make sure your scooter is well-maintained.

With the right handle grip, you can enjoy improved grip and control and better shock absorption. So make sure to replace your handle grip from time to time, and have an enjoyable scooter-riding experience.

I hope your query about how to replace Razor scooter handle grips is answered. Stay safe, and enjoy your ride!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *